Our Products | Valves
 

  SANTORY FLOW DIVERTOR VALVE   

 
  SANTORY FLOW DIVERTOR VALVE 
 SERIES – FDV
FDV (Flow Diverting valve) series valves are designed for flow diverting application. It has one inlet and two outlets and pipe connections can be rotated in any direction with in 360°. This valve also can be opened and cleaned on the line as the bodies parts of the valve can be dismantle from TC clamps very easily. One of the main advantage of this valves is the construction of the valve is zero dead leg type as there are no cavities in the valve and the care has been taken while designing that all the corners are being machined after fabrication and finally all the wetted parts will be electro polished to avoid any contamination inside the valve body. Basic construction of the actuators that is spring loaded piston (single acting) and Spring Less, Piston (Double Acting).
 SPECIFICATIONS:
Size
:
20 mm OD to 50 mm OD.
End Connection
:
Butt Weld end, Tri clover End
Seating and Sealing
:
silicon, EPDM
Body Wetted Parts
:
ANSI SS 316L
Inlet Pressure
:
0 – 6 Bar
Temperature
:
5° C to 130°C MAX.
Internal Finish
:
Up to Ra. < 0.4 micron. (220 grits.)
Back
Our Products Range
>> Pneumatic Products
>> Flot Switch & Pressure Switch
>> Pressure & Temperature Gauge
>> Rota Meter & Meno Meter
>> Valves
>> Brass Fitting
>> P.U. Pipes